Handheld Shower Hose Adaptor

The Handheld Shower Hose Adaptor allows you to add a shower filter to your existing handheld shower head & hose. The problem with installing a shower filter to a handheld shower hose is lack of space between the shower hose connection and the wall. This adaptor allows you to easily install a shower filter with your existing shower hose and allows the shower filter to hang inline. Specifications: Length: 150mm Braided Stainless Steel Fittings: Standard Australian 1/2″ Male & 1/2″ Female BSP Threads Operating Temp: 0°C – 90°C Installation: Turn off water supply and remove shower hose from wall connection using a spanner Clean all connection threads and remove any old thread tape Install Adaptor Hose to wall thread/fitting. Use a small amount of thread tape as required, usually 1-2 wraps is enough Install Shower Filter to Adaptor hose. Use a small amount of thread tape as required, usually 1-2 wraps is enough Install shower hose to Shower Filter. Use a small amount of thread tape as required, usually 1-2 wraps is enough Turn on water supply and inspect for leaks. If any leaks occur, re-tighten and/or add more thread tape to thread     (SHRHHADAPT)